HubsInfo Network

How to Setup a Windows 2008 R2 SNTP/NTP Server

0 Members and 1 Guest are viewing this topic.

How to Setup a Windows 2008 R2 SNTP/NTP Server
« on: September 17, 2013, 07:31:19 PM »
How to Setup a Windows 2008 R2 SNTP/NTP Server
[list=1]
  • Click Start, click Run, type regedit, and then click OK.
  • Locate and then click the following registry entry:   

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\   
  • In the right pane, right-click AnnounceFlags, and then click Modify.
  • In the Edit DWORD Value dialog box, under Value data, type 5, and then click OK.
  • Enable NTPServer.   
[list=1]
  • Locate and then click the following registry subkey:      
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\
Services\W32Time\TimeProviders\NtpServer\
      
  • In the right pane, right-click Enabled, and then click Modify.
  • In the Edit DWORD Value dialog box, type 1 under Value data, and then click OK.

  • Exit Registry Editor.
  • At the command prompt, type the following command to restart the Windows Time service, and then press ENTER:   
net stop w32time && net start w32time   
[/list]


--
Ref:
http://bchavez.bitarmory.com/archive/2009/12/21/how-to-setup-a-windows-2008-r2-sntp-ntp-server.aspx